TORACK BIKEPAL No Lifting Swivel Bike Racks, Wall Mounted Bike Holder review

The TORACK BIKEPAL is worth considering if you want wall-mounted vertical storage and your bike and wall match the published requirements; the listing states a capacity of 78 pounds per rack TORACK BIKEPAL No Lifting Swivel Bike Racks by…. Amazon lists it at $99.99, but that price claim doesn’t specify pack size TORACK BIKEPAL No Lifting Swivel Bike Racks…. Fit and dimensions conflict across sources, so confirm those details before planning your installation.

• One TORACK BIKEPAL rack is listed with a capacity of 78 pounds TORACK BIKEPAL No Lifting Swivel Bike Racks by….
• Wheel fit is listed as either 18–28 inches or 20–28 inches; the stated tire-width limit is also inconsistent TORACK BIKEPAL No Lifting Swivel Bike Racks by… Wallmaster BIKE STORAGE RACK – Wall Mount… TORACK BIKEPAL No Lifting Swivel Bike Racks….
• Published dimensions conflict: one set is 22 by 2.5 by 16 inches, while another is 9.5 by 10.75 by 27 inches TORACK BIKEPAL No Lifting Swivel Bike Racks by… Wallmaster BIKE STORAGE RACK – Wall Mount….
• The Amazon listing price is $99.99, but the claim doesn’t identify the pack size TORACK BIKEPAL No Lifting Swivel Bike Racks….
• Installation instructions say to find a stud and secure the rack with three screws; another source says it must be fixed into structural timber TORACK BIKEPAL No Lifting Swivel Bike Racks by… Wallmaster BIKE STORAGE RACK – Wall Mount….

What is the TORACK BIKEPAL, and how does its swivel mechanism store a bike vertically?

The TORACK BIKEPAL is a wall-mounted rack intended to store a bike vertically in U-shaped wheel cradles TORACK BIKEPAL No Lifting Swivel Bike Racks by…. The product information says the cradles support the whole wheel and distribute weight across it, rather than concentrating support at one point TORACK BIKEPAL No Lifting Swivel Bike Racks by…. That’s the design claim; the available sources don’t provide an independent test of its effect on a wheel.

The rack is described as swivelling from left to right to help with loading and unloading TORACK BIKEPAL No Lifting Swivel Bike Racks by…. Another source says you can angle stored bikes to make room for other items Wallmaster BIKE STORAGE RACK – Wall Mount…. The listing calls the loading method “no lift”: roll the front wheel into the rack instead of lifting the bike over a hook Wallmaster BIKE STORAGE RACK – Wall Mount…. That describes the intended method, not a verified result from handling or testing the rack. If you’re considering it, the central appeal is clear enough: wall mounting, vertical storage, and a cradle that moves. Whether the arrangement works in your space will depend on fit and installation details the sources don’t fully settle.

TORACK BIKEPAL No Lifting Swivel Bike Racks, Wall Mounted Bike Holder

$99.99

In Stock

Check Price on Amazon

As an Amazon Associate, I earn from qualifying purchases

What bike wheel sizes, tire widths, and bike types fit the BIKEPAL?

The published bike-fit figures don’t agree, so you shouldn’t treat one range as settled. Two specification sources give a wheel range of 18–28 inches and a maximum tire width of 2.1 inches TORACK BIKEPAL No Lifting Swivel Bike Racks by…. A separate source gives a 20–28-inch wheel range, also with tires up to 2.1 inches wide Wallmaster BIKE STORAGE RACK – Wall Mount…. The Amazon product description, by contrast, states a maximum tire width of 2.4 inches TORACK BIKEPAL No Lifting Swivel Bike Racks….

Listed bike types vary, too. One source names mountain, road, folding, and adult bikes TORACK BIKEPAL No Lifting Swivel Bike Racks by…, while another names road, folding, and children’s bikes Wallmaster BIKE STORAGE RACK – Wall Mount…. A separate compatibility warning says bikes fitted with mudguards or fenders aren’t compatible Wallmaster BIKE STORAGE RACK – Wall Mount…. The sources don’t explain how to resolve these differences or define what makes a bike fit within a borderline measurement. If your wheels or tires are near a stated limit, or your bike has fenders, get confirmation before relying on the listing. The figures are useful as a starting point, not a consistent guarantee of fit.

How much weight can one rack support, and what are its dimensions and wall-clearance needs?

The listed capacity is 78 pounds per BIKEPAL rack TORACK BIKEPAL No Lifting Swivel Bike Racks by…. That figure appears consistently in two other sources, including one that describes the capacity as up to 78 pounds Wallmaster BIKE STORAGE RACK – Wall Mount…. The published dimensions, however, conflict. One specification gives 22 inches deep by 2.5 inches wide by 16 inches high TORACK BIKEPAL No Lifting Swivel Bike Racks by…. Another gives 9.5 inches deep by 10.75 inches wide by 27 inches high Wallmaster BIKE STORAGE RACK – Wall Mount….

The available sources don’t establish the wall clearance required for the rack or a stored bike. The dimensions alone don’t answer that question, so it would be unwise to infer a clearance figure from them. This matters if you’re planning more than one rack or trying to fit bikes around other stored items. Measure the intended area, then ask the seller to confirm which dimensions apply and how much clearance the installed rack needs. Until those details are clarified, a multi-rack layout remains a plan based on uncertain specifications, not a layout you can confidently size from the available information.

What comes in the 2-pack or 4-pack, and how do the listed prices compare?

The Amazon listing shows a price of $99.99, but the available price claim doesn’t say whether that price is for one rack or a pack TORACK BIKEPAL No Lifting Swivel Bike Racks…. Other sources list $83.29 alongside a crossed-out $170.99 for a 2-pack listing TORACK BIKEPAL No Lifting Swivel Bike Racks…. Two sources give different prices for a 4-pack: $329.98 TORACK BIKEPAL No Lifting Swivel Bike Racks by… and $527.97 TORACK BIKEPAL No Lifting Swivel Bike Racks by…. These are source-specific listed prices, not a reliable like-for-like comparison.

The available information also doesn’t provide a consistent breakdown of what’s included in each package. It would be misleading to infer that the Amazon price covers a particular quantity or to treat all the figures as current, equivalent offers. Before choosing a pack, verify the package size and the price shown on the listing you’re considering. If you’re planning several bikes, confirm the number of racks in the package rather than relying on the product title or a price quoted elsewhere. The sources leave both the Amazon pack size and a consistent comparison unresolved.

How do you install the BIKEPAL, and what tools and wall anchors are required?

The listed installation steps are to find a stud, mark the position at the recommended height, and fasten the rack with three screws TORACK BIKEPAL No Lifting Swivel Bike Racks by…. Another source also specifies three screws per unit Wallmaster BIKE STORAGE RACK – Wall Mount…. The listing says mounting hardware is included TORACK BIKEPAL No Lifting Swivel Bike Racks by…, but the available sources don’t identify a complete tool list or clearly say which wall anchors are included. A general wall-rack guide mentions marking drill locations, drilling holes, inserting anchors, and fastening the rack, but that doesn’t establish the BIKEPAL’s specific anchor requirements Amazon.com: Wallmaster BIKEPAL Swivel Bike….

One installation source is clear about the wall: the rack should be fixed into structural timber, and plasterboard alone is described as insufficient for the stated loads Wallmaster BIKE STORAGE RACK – Wall Mount…. Another recommends having a second person hold the rack while you start the first screw, though it says solo installation is feasible Wallmaster BIKE STORAGE RACK – Wall Mount…. So the basic steps are available, but the exact tools and anchors aren’t. Confirm those details for your wall before beginning, and don’t treat the included-hardware statement as proof that every wall type is covered.

Disclosure: As an Amazon Associate, I earn from qualifying purchases.

Can you load and remove a bike without lifting it?

The listing describes the BIKEPAL as eliminating the need to lift a bike during loading TORACK BIKEPAL No Lifting Swivel Bike Racks by…. Another listing makes the same claim, and the described approach is to install the rack at the recommended height, then roll the bike on and off TORACK BIKEPAL No Lifting Swivel Bike Racks by… TORACK BIKEPAL No Lifting Swivel Bike Racks by…. This is product information, not a result verified by a hands-on test.

The stated no-lift method is to roll the front wheel into the stand rather than raise the bike over a hook Wallmaster BIKE STORAGE RACK – Wall Mount…. The swivel is described as rotating left to right for loading and unloading TORACK BIKEPAL No Lifting Swivel Bike Racks by…. Beyond rolling the bike on and off, however, the available sources don’t give a detailed sequence for turning, seating, or removing it. They don’t establish how the process feels with different bikes or in different spaces. If lifting is the concern that brought you to this rack, the intended method is relevant; the limits of the claim are relevant, too. Confirm that your bike fits and that the planned installation height works for your setup.

How does a swivel wall rack compare with a floor stand or fixed wall hook?

A general bike-rack guide says wall-mounted racks save floor space, while floor-standing racks occupy floor space Amazon.com: Wallmaster BIKEPAL Swivel Bike…. The BIKEPAL’s swivel design is described as letting bikes sit at angles to make room for other stored items Wallmaster BIKE STORAGE RACK – Wall Mount…. That may matter in a crowded storage area, but the sources don’t provide a direct performance test against a floor stand or a fixed wall hook.

The product information distinguishes its U-shaped cradles from hooks that support a wheel at one spot: it says the cradles support the whole wheel and distribute weight across it TORACK BIKEPAL No Lifting Swivel Bike Racks by… TORACK BIKEPAL No Lifting Swivel Bike Racks…. That’s a description of the design, not comparative evidence that the rack prevents damage better than every alternative. A wall-mounted option also depends on a suitable mounting point, which the installation guidance says should be structural timber Wallmaster BIKE STORAGE RACK – Wall Mount…. In practical terms, the stated trade-off is between using wall space to free floor area and the need to check fit, clearance, and wall structure. There’s no source-backed basis here for declaring one rack style best for every room or bike.

What should you check about your wall, bike, and storage space before buying?

Before buying the BIKEPAL, check the wall first. The installation guidance says the rack should be fixed into structural timber and that plasterboard alone is insufficient for the stated loads Wallmaster BIKE STORAGE RACK – Wall Mount…. Next, compare your bike’s wheel size and tire width with the published limits: sources disagree on whether the wheel range begins at 18 or 20 inches, and the Amazon description gives a different tire-width maximum from the specification sources TORACK BIKEPAL No Lifting Swivel Bike Racks by… Wallmaster BIKE STORAGE RACK – Wall Mount… TORACK BIKEPAL No Lifting Swivel Bike Racks….

Check for mudguards or fenders, too; one source says bikes with them aren’t compatible Wallmaster BIKE STORAGE RACK – Wall Mount…. Then measure the intended space and request confirmation of both the rack dimensions and its required wall clearance, since the published dimensions conflict and clearance isn’t established in the available sources TORACK BIKEPAL No Lifting Swivel Bike Racks by… Wallmaster BIKE STORAGE RACK – Wall Mount…. Buyers with bikes near the stated fit limits, bikes with fenders, or walls without structural timber shouldn’t rely on the listing without clarification. Those are not minor details to settle after you’ve planned a layout. They determine whether the stated use fits your bike and mounting location at all.

Pros and Cons

Final Verdict

Frequently Asked Questions

What is the weight limit for one TORACK BIKEPAL rack?

The listed capacity is 78 pounds per rack TORACK BIKEPAL No Lifting Swivel Bike Racks by….

Does the BIKEPAL fit bikes with fenders?

One source says bikes fitted with mudguards or fenders aren’t compatible Wallmaster BIKE STORAGE RACK – Wall Mount….

Does the Amazon price specify how many racks are included?

No. The $99.99 Amazon price claim doesn’t specify the pack size TORACK BIKEPAL No Lifting Swivel Bike Racks….

Can you install the rack on plasterboard alone?

The installation guidance says the rack should be fixed into structural timber and that plasterboard alone is insufficient for the stated loads Wallmaster BIKE STORAGE RACK – Wall Mount….

Disclosure: As an Amazon Associate, I earn from qualifying purchases.